MaxZero Fan Controller Discontinued
More variations available Show

Nesteq MaxZero Fan Controller

MaxZero fan controller enables you to control and adjust the revolution of up to eight fans, while precisely measuring temperatures with the supplied temp sensors.

NesteQ’s MaxZero fan controller enables you to control and adjust the revolution of up to eight fans, while precisely measuring temperatures with the four supplied temp sensors. Installation is easy with all the required cables and accessories included in the package.

Features

Glossy black finish blends seamlessly into your setup
Easily readable display showing fan revolutions and temperatures
4 accurate temperature sensors and 8 fans under control
Automatic adjustment for each fan group: 0V, 5V, 7V, 12V
Over-temperature alarm setting range between 38°C and 85°C
“0dB(A) Mode” for longer silent intervals - fans activated at 45°C

As a safety feature an alarm can be set to go off between the temperatures of 38°C and 85°C. This happens when the temperature reaches the pre-defined setting, a visual and audible (alarm) alert will then be triggered. Of course if this type of alarm is not required it can be turned off manually.

The MaxZero can automatically change the speed of the fans depending on the temperature of the sensors. Three different fan speeds are available, LOW, MID or HIGH RPM. If the temperature continues to rise, the fan speed will continue to increase until it reaches HIGH-RPM, which is the fans’ full speed. If the temperatures then start to fall, the fan speed will also fall. This feature means if you need to control the cooling, you can be confident the fans’ speed will increase and decrease according to the sensors temperatures.

The MaxZero also has a “0dB(A) Mode”. If the temperature sensor stays below 45°C then the fan will never switch on, giving you absolute silence for longer. As soon as the temperature reaches the threshold, the fans will then start to rotate and continue to do so in conjunction with the temperatures. If the temp then hits below 45°C the fans will turn off again.

Specifications	MaxZero
Model No	NFS-2208D
Dimensions (L x W x H)	78mm x 148.5mm x 42mm
Material	Plastic
Colour	Black
Cable length	80cm (fan power cables / temperature sensors)
Connector type	3-Pin (standard Molex) and PWM compatible
LED (Display)	Display for fan RPM, temperature sensors (°C) and security alerts
Rated voltage / power (output)	0, 5, 7, 12 Volt automatic regulation / 0.4A, 4.8W per channel max.
Rated voltage (input)	DC 12 Volt (4-Pin standard Molex)
Warranty	24 months
EAN barcode	3246436780049

Specifications	MaxZero
Model No	NFS-2208D
Dimensions (L x W x H)	78mm x 148.5mm x 42mm
Material	Plastic
Colour	Black
Cable length	80cm (fan power cables / temperature sensors)
Connector type	3-Pin (standard Molex) and PWM compatible
LED (Display)	Display for fan RPM, temperature sensors (°C) and security alerts
Rated voltage / power (output)	0, 5, 7, 12 Volt automatic regulation / 0.4A, 4.8W per channel max.
Rated voltage (input)	DC 12 Volt (4-Pin standard Molex)
Warranty	24 months
EAN barcode	3246436780049

Customer Reviews

Great value, good looks

Nikos Kyriacou, 11th May 2011

Great value, good looks, only one or two things i would improve. Firstly, the good points. It looks great, but then I’m a fan of LCD screens, especially those with neon blue displays. It makes good subtle eye candy on the front of your pc. Secondly, its a flat screen, with subtly placed push button controls, so its quite smart and sleek. Thirdly, it controls 8 fans using only a single 5” bay so is an efficient use of available space. Fourthly, I like the fact that i can see the status of all fans, plus temps, all the time without having to cycle through multiple displays for each fan.

But… Its really a 4 fan controller with splitter cables so that each controller port services two fans. Not a big deal TBH, just would have been the icing on cake if each fan was truly independent as a proper 8 fan controller would be. Overall, great value and good looks.