CoolForce 2 ATX Midi Tower Chassis Discontinued | |
More variations available Show |
Nanoxia CoolForce 2 ATX Midi Tower Chassis
An elegant but feature rich chassis supplied with three cooling fans and capable of accommodating water cooling components.
Nanoxia’s CoolForce series is aimed at fans of water-cooled systems and offer various possibilities for the installation of radiators and other water cooling components. The case offers a very elegant front design that looks sophisticated yet simple, but on the other hand, thanks to pre-installed LEDs it can be a real eye-catcher. Particularly noteworthy points are the black corners of the case, framing the power button.
Features
- Elegant front panel design
- Unique features such as Air Cover and ModuWand
- Supplied with three 140mm fans
- Built-in fan controller
- Accommodates water cooling components
The CoolForce 2 offers many practical features, such as the Nanoxia “AirCover” and the oddly named Nanoxia “ModuWand” (short for modular wall). The special highlights are the pre-installed rigid LED bars behind the front panel, which light up in typical Nanoxia Green. A window side panel allows for an unobstructed view on the installed hardware.
The ModuWand is one of the outstanding features of the case. If necessary, it can simply be removed to install longer graphics cards or it can be equipped with fans, hard drives or a reservoir / pump for a water cooling system.
![The ModuWand is designed to hold HDDs as shown. It can be removed to allow for longer graphics cards to be installed if required](/images/products/na-coolforce2-moduwand.jpg)
The ModuWand is designed to hold HDDs as shown. It can be removed to allow for longer graphics cards to be installed if required
The front of the case is deliberately held simple, visually striking are the LED bars which shine through the louvers, as well as the green illuminated Nanoxia logo. Two bays for installing optical drives are available. The optical drives offer tool-free mounting. In the lower left corner of the front of the LED is the on/off button, with which you can always comfortable turn off the Rigid LED strips.
At the top of the case you can find the I/O panel. If you look straight at the front, you can see at the left corner the USB ports (2 x USB 3.0, 1 x USB 2.0), the HD-Audio connectors and the fan control are located in the right corner
Also in the top cover, there is our practical Nanoxia “Air Cover”. This cover can be conveniently removed when users want to install fans or radiators. This preserves the simple look of the case, without sacrificing useful features and ventilation.
The side panels are equipped with the noise-reducing insulation materials. These are designed to minimise any noises from inside the case. The hard disks and power supply are mounted using rubber suspension. The case stands on decoupled feet, therefore reducing vibrations. By using materials of the highest quality Nanoxia ensure that the case is extremely stable.
Three 140mm fans from the CoolForce fan series are pre-installed. Two of them rotate behind the front panel, the third fan can be found at the rear. If the Air Cover is removed, up to three additional 120 or 140mm fans can be installed at the top. Other fans can be mounted on the ModuWand and the bottom of the case. This means it is possible to install a maximum of nine fans in the CoolForce 2. The pre-installed 3-stage fan controller allows to control up to three case fans.
The CoolForce 2 is designed as an entry-level case for water cooling enthusiasts. Behind the front panel, there is enough space for a 240mm radiator or compact water cooling solutions. Under the top cover, users can install 360mm radiators without any issues.
The case has special, laterally offset mounting points that allow maximum compatibility, especially when using particularly thick radiators. However, it may be necessary to install in low-profile RAM in this case.
For fans of SSDs no less than four dedicated mounting spaces are available in the case – three can be found on the left side, as seen from the front; one is located in the back of the motherboard tray. The ModuWand also offers the possibility to mount two 2.5” or 3.5” drives – even two drives (2x 2.5”, 2x 3.5”) per side, if desired.
A fully modular HDD cage for two 3.5” hard drives can be found between the ModuWand and the front. They come with mounting rails to significantly expand the disk capacity, using the separately available HDD cages. Included are special SATA combination cables to allow the trouble-free installation of the hard drives on the ModuWand or on the 2.5” holders. These are also available separately.
In the CoolForce 2 you have the possibility to install graphic cards with a length of up to 300mm. By removing the ModuWand, cards with a length of 430mm can be installed inside the case.
Four rubber hose guides for external water cooling solutions can be found in the rear panel.
In addition to high-end graphic cards, users can install CPU coolers of up to 185mm in height. Eight PCI expansion slots are located at the rear – the installation of a multi-GPU system is therefore possible at any time.
Specifications | CoolForce 2 |
---|---|
Case Type | Midi Tower |
Form Factor | ATX, XL-ATX, Micro-ATX, Mini-ITX |
5.25 inch drive bay external | 2 x |
2.5 inch drive bay internal | max.6 x |
3.5 inch drive bay internal | max. 4 x |
Case Fan (Front) | 2x 140 mm, 1100 RPM (supplied) |
Case Fan (Rear) | 1x 140 mm, 1100 RPM (supplied) |
Case Fan (Top) | 3x 120/140 mm (not supplied) |
Case Fan (Bottom) | 1 x 120/140 mm (not supplied) |
Case Fan (ModuWand) | 2 x 120/140 mm (not supplied) |
Height (Approx.) | 495 mm |
Width (Approx.) | 207 mm |
Depth (Approx.) | 525 mm |
Material | Steel, plastic |
Weight (Approx.) | 9.9 kg |
Maximum installation height of CPU coolers | 185 mm |
Maximum VGA Card Length | 300mm (430mm with ModuWand removed} |
Warranty | 24 months |
EAN barcode | 4260285290527 |
Specifications | CoolForce 2 |
---|---|
Case Type | Midi Tower |
Form Factor | ATX, XL-ATX, Micro-ATX, Mini-ITX |
5.25 inch drive bay external | 2 x |
2.5 inch drive bay internal | max.6 x |
3.5 inch drive bay internal | max. 4 x |
Case Fan (Front) | 2x 140 mm, 1100 RPM (supplied) |
Case Fan (Rear) | 1x 140 mm, 1100 RPM (supplied) |
Case Fan (Top) | 3x 120/140 mm (not supplied) |
Case Fan (Bottom) | 1 x 120/140 mm (not supplied) |
Case Fan (ModuWand) | 2 x 120/140 mm (not supplied) |
Height (Approx.) | 495 mm |
Width (Approx.) | 207 mm |
Depth (Approx.) | 525 mm |
Material | Steel, plastic |
Weight (Approx.) | 9.9 kg |
Maximum installation height of CPU coolers | 185 mm |
Maximum VGA Card Length | 300mm (430mm with ModuWand removed} |
Warranty | 24 months |
EAN barcode | 4260285290527 |
Top Quiet PC Cases
![Antec P5-SILENT, Quiet Mid-Tower Micro-ATX PC Chassis](/images/products/antec-p5-silentsm.png)
Antec P5-SILENT, Quiet Mid-Tower Micro-ATX PC Chassis
![Akasa Galileo TU3 Plus MKII 1U Rackmount Fanless Thin Mini-ITX Case](/images/products/akasa-galileo-tu3-plussm.png)
Akasa Galileo TU3 Plus MKII 1U Rackmount Fanless Thin Mini-ITX Case
![MyElectronics 19in 2U Rackmount Short Depth Mini-ITX Chassis](/images/products/me-2u-19-chassis-shortsm.png)
MyElectronics 19in 2U Rackmount Short Depth Mini-ITX Chassis
![Fractal Design Meshify 2 Compact Black PC Case](/images/products/fd-meshify-2-compactsm.png)
Fractal Design Meshify 2 Compact Black PC Case
![GameMax Vista Micro-ATX Black Case](/images/products/gmx-vista-mbsm.png)
GameMax Vista Micro-ATX Black Case
![Fractal Design Define 7 Compact Black Mid Tower PC Case](/images/products/fd-define7-compact-blacksm.png)
Fractal Design Define 7 Compact Black Mid Tower PC Case
![Gelid Black Diamond ATX Chassis](/images/products/gel-black-diamondsm.png)
Gelid Black Diamond ATX Chassis
![Streacom ST-BC1 V2 Silver Aluminium ATX Open Benchtable](/images/products/st-bc1s-v2sm.png)
Streacom ST-BC1 V2 Silver Aluminium ATX Open Benchtable
![Streacom ST-BC1 V2 Titanium Aluminium ATX Open Benchtable](/images/products/st-bc1t-v2sm.png)
Streacom ST-BC1 V2 Titanium Aluminium ATX Open Benchtable
![Streacom DA2 V2 Silver Full Aluminium Compact ITX Chassis](/images/products/st-da2-v2-silversm.png)
Streacom DA2 V2 Silver Full Aluminium Compact ITX Chassis