Speed Touch 6 LCD Fan Speed Controller Discontinued | |
| More variations available Show | |
Gelid Solutions Speed Touch 6 LCD Fan Speed Controller
A stylish LED Fan Controller with a convenient touch screen that can control up to six 3 or 4-pin PWM fans (30W per channel).
SpeedTouch 6 Fan Controller
Features
- Capacitive touch screen panel
- Supports both 3 and 4-pin PWM fans
- Six fan control channels
- Can turn off fans completely
- Six temperature sensors
- 30 watts per channel
- Automatic and manual speed control
The SpeedTouch 6 provides control for up to six fans with each channel supporting 30W per channel. This fan controller is built into a high quality aluminium case and is fully compatible with either standard 3-pin case fans or 4-pin PWM fans like those normally found on CPU coolers. Each fan channel includes a temperature sensor and the speed of each channel can be adjusted automatically or manually.
Speed Control
The supported voltage range is 6 to 12v (or completely off) as this will allow a wide range of speeds regardless of the fan being used. Each channel can operate in manual or automatic mode. In automatic mode the temperature range is 25°C to 50°C. When the temperature is 25°C or lower, then fans will operate at their slowest speed (6V) and this will steadily rise to 12V as the temperature approaches 50°C.
The fan speed is displayed to two digits accuracy. For example, if the actual speed of the fan is 1653 RPM then it will be displayed as 1650 RPM.
Temperature Display
The temperature can be displayed in both Celsius or Fahrenheit by simply pressing the temperature reading on the display.
Screen Brightness
The brightness of the control panel can be adjusted for to suit the surroundings by pressing the brightness button on the screen.
PWM Compatibility
Please note that although 4-pin PWM fans are supported and can be connected to the fan controller, PWM functionality is not supported.
Review
Bit-tech.net
Despite our reservations with the inclusion of a touch screen rather than dials and buttons, the SpeedTouch 6 is quick and easy to use and wonderfully responsive. It’s reasonably priced too and comes with everything you need you control up to six fans manually or automatically using the included thermal sensors.
| Specifications | Speed Touch 6 |
|---|---|
| Auto Control Range | 6v (25°C or below) to 12v (50°C or above) |
| Brightness (Levels) | 3 |
| Control Modes | Automatic / Manual |
| Dimensions | 149 x 42 x 70mm (W x H x D) |
| Display Colour | Blue |
| Fan Cable Length | 600mm |
| Fan Channels | six |
| Fan Connector | 4 Pin (supports 3-Pin & 4-Pin PWM Fans) |
| Form Factor | 5.25” Drive Bay |
| Manual Control Range | 5 to 12v (±10%) |
| Material | Aluminium Alloy |
| Maximum Wattage per Fan Channel | 30W |
| Mounting Screws | 4 |
| Power Interface | 4 Pin Molex |
| Screen Size | 113 x 26mm (W x H) |
| Temperature Range | 0 - 100°C |
| Temperature Sensor | 6 |
| Touch Screen Sensor | Capacitive Type |
| Warranty (years) | 2 |
| Working Temperature | 0 - 50°C |
| Warranty | 24 months |
| EAN barcode | 4897025780897 |
| Specifications | Speed Touch 6 |
|---|---|
| Auto Control Range | 6v (25°C or below) to 12v (50°C or above) |
| Brightness (Levels) | 3 |
| Control Modes | Automatic / Manual |
| Dimensions | 149 x 42 x 70mm (W x H x D) |
| Display Colour | Blue |
| Fan Cable Length | 600mm |
| Fan Channels | six |
| Fan Connector | 4 Pin (supports 3-Pin & 4-Pin PWM Fans) |
| Form Factor | 5.25” Drive Bay |
| Manual Control Range | 5 to 12v (±10%) |
| Material | Aluminium Alloy |
| Maximum Wattage per Fan Channel | 30W |
| Mounting Screws | 4 |
| Power Interface | 4 Pin Molex |
| Screen Size | 113 x 26mm (W x H) |
| Temperature Range | 0 - 100°C |
| Temperature Sensor | 6 |
| Touch Screen Sensor | Capacitive Type |
| Warranty (years) | 2 |
| Working Temperature | 0 - 50°C |
| Warranty | 24 months |
| EAN barcode | 4897025780897 |
Customer Reviews
Great product - but...
I have 2 NZXT cases, but recently the fan noise have become more noticable, so I bought this product to control the fans. However the NZXT fans use 4 pin Molex connectors, and this product comes with a smaller three pin connector type, which means I needed adapters for my fans, which added to the overall cost of the mod. Also because my fans are only two pin their speeds cannot be displayed. Though now they’re controlled the fans are quieter, so I’m very happy with the product.
Awesome Product
Really well built, easy to install and just works. It would be even better if it could turn fans off based on a threshold temp.
See Also
Product Resources
Top Case Accessories
Acousti AcoustiFeet Soft Anti-Vibration Feet ACF3007-20B
Acousti AcoustiFeet Firm Anti-Vibration Feet ACF3007-30B
FLIRC USB (version 2) - Use any Remote with your Media Center
Gelid PCI Slot Fan Holder with two slim 120mm UV Blue Fans
Quiet PC SupaHub PCIe to 4x Type A and 1x Type C USB Card
Streacom ST-BM1 Biometric Power Switch
Streacom Fanless GPU Cooler for ST-DB4 Chassis
Quiet PC Professional Grade Air Duster, 400ml CFC Free Aerosol
Gelid PCI Bracket with Removable Dust Filter, pack of 3
Gelid Mesh Magnet 140 Fan Dust Filter for 120mm fans, 3pcs
