V6000 Ultra Quiet High Performance VGA Cooler Discontinued | |
| More variations available Show | |
DeepCool V6000 Ultra Quiet High Performance VGA Cooler
Introducing Deepcool’s flagship VGA cooler, the high performance V6000.
The V6000 is Deepcool’s top of the range VGA cooler. The V6000 offers superior cooling performance over the stock cooler thanks to its high quality dual 92 mm fans and array of six nickel-plated heatpipes which run the entire length of the cooler. The fans operate at around 25 dB(A) regardless of load which is much lower than the fan on a typical stock cooler which could be as high as 40 dB(A).
This is a perfect solution for overclockers looking to push their graphics card to its limits and also the silent enthusiast who demands quietness combined with low temperatures.
Features
- Multi-compatible VGA cooler for both NVIDIA and ATI high-end VGA cards
- Six heatpipes transfer heat from the base to heatsink efficiently
- Aluminium heatsink with dense fin array offers high cooling performance
- Dual 92mm fans with TPE cover fan frame to absorb operating vibration and noise
The V6000’s dual 92 mm fans have a rubber-coated frame, which helps to absorb vibration. Both fans have standard a 3-pin connector and a splitter/adapter cable is supplied allowing both fans to attach to one 3-pin fan header on the motherboard.
If your motherboard doesn’t have any spare 3-pin fan headers then we would suggest using a PSU adapter such as the Zalman MC1.
The speed of the fans do not vary and remains constant at around 1800 RPM but if you prefer to have control over the V6000’s fan speed, we would recommend that you use a Zalman FANMATE 2 or similar fan controller, which will allow you to set your preferred cooling/noise balance.
| Specifications | V6000 |
|---|---|
| ATI Compatibility | HD6870, HD5870, HD5850, HD5770, HD5750, HD5670, HD4890, HD4870, HD4850, HD4830, HD4750, HD2600 Series, X1600 Series, X1900 Series |
| Nvidia Compatibility | GTX480, GTX470, GTX460, GT210, GT220, GT240, GTS250, 9800GTX+, 9800GTX, 9800GT, 9600GT, 8800GT, 8800GTS (G92), 8800GTX, 8800Ultra, 7900GTX, 7900GT, 7900GS |
| Overall Dimension | 212.5 x 110.5 x 65mm |
| PCI Slots Required | 4 |
| Fan Dimension | 92 x 92 x 25mm |
| Net Weight | 759 g |
| Bearing Type | Hydro Bearing |
| Rated Voltage | 12 VDC |
| Operating Voltage | 10.8 to 13.2 VDC |
| Start Voltage | 7 VDC |
| Rated Current | 0.16 ±10% A |
| Power Input | 1.92W |
| Fan Speed | 1800 RPM ±10% |
| Max Air Flow | 66 CFM |
| Noise Level | 24.6dB(A) |
| Warranty | 24 months |
| EAN barcode | 6933412706410 |
| Specifications | V6000 |
|---|---|
| ATI Compatibility | HD6870, HD5870, HD5850, HD5770, HD5750, HD5670, HD4890, HD4870, HD4850, HD4830, HD4750, HD2600 Series, X1600 Series, X1900 Series |
| Nvidia Compatibility | GTX480, GTX470, GTX460, GT210, GT220, GT240, GTS250, 9800GTX+, 9800GTX, 9800GT, 9600GT, 8800GT, 8800GTS (G92), 8800GTX, 8800Ultra, 7900GTX, 7900GT, 7900GS |
| Overall Dimension | 212.5 x 110.5 x 65mm |
| PCI Slots Required | 4 |
| Fan Dimension | 92 x 92 x 25mm |
| Net Weight | 759 g |
| Bearing Type | Hydro Bearing |
| Rated Voltage | 12 VDC |
| Operating Voltage | 10.8 to 13.2 VDC |
| Start Voltage | 7 VDC |
| Rated Current | 0.16 ±10% A |
| Power Input | 1.92W |
| Fan Speed | 1800 RPM ±10% |
| Max Air Flow | 66 CFM |
| Noise Level | 24.6dB(A) |
| Warranty | 24 months |
| EAN barcode | 6933412706410 |
Customer Reviews
This piece of kit is the business !!
Fitted this to a Sapphire HD6870 which took all of 10 minutes! Very simple to install, add 8 heatsinks to memory chips, plus 4 screws to hold the new cooler in place. Fab build, nickel plated, high quality fans have rubber surrounds to reduce vibration, whisper quiet too (checked them out against some Noctua fans and couldn’t tell the difference)
One of the more expensive units, one slot wider too, but this piece of kit is the business !! At full load the HD6870 temp was 55C. IMO, worth every penny.
