ZM-F2 92mm fan Discontinued | |
| More variations available Show | |
Zalman ZM-F2 92mm fan
92mm silent case fan free from noise and vibration emissions
Features
- Quiet PC 92mm case cooling fan
- Noise level from 20 dB(A)
- Great value for money
- In-line resistor supplied
Reviews
silentpcreview.com
The NoFan CR-95C Copper is the first heatsink to actually pass our open platform cooler test without any assistance from a fan. Unlike the Thermalright HR-02 Macho or Silverstone Heligon HE02, it was designed from the ground up as a purely passive heatsink. There is no safety net, no fan mount option, and it doesn’t need one so long as the processor with which it’s paired doesn’t exceed the specified 95W TDP limit. We’ve encountered several “fanless” products that didn’t live up to their promises but the CR-95C passes muster with plenty of headroom.
eTeknix
If you’re the kind of user who is frustrated with a noisy computer and you’ve realised the noisiest part of your computer is the CPU cooler, then we’d definitely say to you that this is a product to strongly consider. Providing you meet the space, RAM and processor requirements of this cooler, it really is a fantastic breath of fresh air. NoFan have taken the CPU cooler market, and turned it upside down.
Quiet Mark
…Users will not be aware of any noise emissions. Noise generated by the monitor, for example, normally not considered to be a noisy item, is considerably louder than the PC itself during the boot cycle.
Overclock3D.net
Right so a 100% passive heat sink, we honestly thought this would be a bit of a downer review, but I can confirm nice and early we completely love the CR-95!
HardwareLook.com
The Nofan Fanless CR-95C IcePipe is a great solution for silent running for the sound conscious user. At 100% load on a 3.5GHz clock speed with a Core i7-2600K, the temperature only reaches 78 degrees Celsius; a really good result for a completely fanless cooling device.
| Specifications | ZM-F2 |
|---|---|
| Fan size (edge to edge) | 92 mm |
| Manufacturer | Zalman |
| Model | ZM-F2 |
| Air volume at full speed (12V), CFM ±10% | 53.9 |
| Noise level at full speed (12V), dB(A) | 36.0 |
| Fan speed at full speed (12V), RPM ±10% | 3000 |
| Air volume at reduced speed (7.5V), CFM ±10% | 40.0 |
| Noise level at reduced speed (7.5V), dB(A) | 20.0 |
| Fan speed at reduced speed (7.5V), RPM ±10% | 1600 |
| Power consumption, W | 0.65 |
| Weight, g | 88 |
| Approximate cable length, cm | 33 |
| Life expectancy @ 25°C continuous use | 3 years |
| Power connector | 3-pin |
| Bearing type | Sleeve |
| Accessories | RC56 |
| Mounting hardware included | Screws |
| Fan depth | 25 mm |
| Rated voltage | 12 VDC |
| EAN barcode | 0823884000924 |
| Specifications | ZM-F2 |
|---|---|
| Fan size (edge to edge) | 92 mm |
| Manufacturer | Zalman |
| Model | ZM-F2 |
| Air volume at full speed (12V), CFM ±10% | 53.9 |
| Noise level at full speed (12V), dB(A) | 36.0 |
| Fan speed at full speed (12V), RPM ±10% | 3000 |
| Air volume at reduced speed (7.5V), CFM ±10% | 40.0 |
| Noise level at reduced speed (7.5V), dB(A) | 20.0 |
| Fan speed at reduced speed (7.5V), RPM ±10% | 1600 |
| Power consumption, W | 0.65 |
| Weight, g | 88 |
| Approximate cable length, cm | 33 |
| Life expectancy @ 25°C continuous use | 3 years |
| Power connector | 3-pin |
| Bearing type | Sleeve |
| Accessories | RC56 |
| Mounting hardware included | Screws |
| Fan depth | 25 mm |
| Rated voltage | 12 VDC |
| EAN barcode | 0823884000924 |
FAQ
How do I measure fan size?
The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.
As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.
If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.
Screw hole spacings and fan sizes
Space Between Screw Holes Fan Size 32mm 40mm 40mm 50mm 50mm 60mm 60mm 70mm 72mm 80mm 83mm 92mm 105mm 120mm I received a small cable (resistor) with my fan; what is it for?
The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.
How can I tell which way the air blows through the fan?
Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.
Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?
Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.
The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.
Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.
Top Quiet Fans
Noctua NF-A12x25 PWM chromax.black.swap 12V 2000RPM 120mm Fan
Noctua NF-R8 REDUX 12V 1200RPM 80mm Quiet Case Fan
Noctua NF-F12 iPPC PWM 12V 2000RPM 120mm High Performance Fan
Gelid Silent 6, 60mm Quiet Case Fan
Noctua NF-A9x14 PWM 12V 2200RPM 92x14mm Premium Quality Fan
Noctua NF-P12 REDUX PWM 12V 1300RPM 120mm Quiet Case Fan
Noctua NF-F12 iPPC PWM 12V 3000RPM 120mm High Performance Fan
Noctua NF-A6x25 PWM 12V 3000RPM 60x25mm Low Noise Fan
Noctua NF-S12B REDUX 12V 700RPM 120mm Quiet Case Fan
Noctua NF-A12x25 PWM 12V 2000RPM 120mm Ultimate Quality Quiet Fan
