Zalman Z9 Series Tower Computer Cases

The Zalman Z9 series cases are excellent value for money and are packed with features that you would only expect on more expensive cases.

Front Mesh Cover With Dust Filters

The front mesh bay cover allows cool air to enter the system, while the dust filters prevent dust build-up inside the case.

---

Supports Up to Seven Fans

A total of seven (Z9, 5 for Z9-U3) fans can be installed in the case. This will help to introduce and expel air effectively from the case, resulting in lower operating temperatures.

Z9 - supplied with two 120mm fans; one blue LED fan at the front and a standard white blade fan to the rear.
Z9-U3 - supplied with three 120mm fans; one blue LED 120mm fan installed at the front and top and a standard white blade fan to the rear.

---

Supports Bottom PSU Installation and Cut-out for Cable Management

To keep the PSU as cool as possible, the cases have a bottom PSU configuration. There are also cut-outs to allow for tidy cable management.

---

Black Interior Coating

The interior of the chassis is coated black to provide a sense of unity and elegant design.

---

Tool Free HDD Installation with Anti-Vibration Rubber

The server-type tool-free HDD mount trays allow for easy HDD installation/removal and maintenance. All HDDs are mounted using anti-vibration rubber mounts to aid in reducing HDD noise.

---

Spacious Interior for Installing 290mm Graphics Cards

The interior has been designed to be spacious for easy installation and maintenance of various components, including graphics cards up to 290mm long.

---

Front I/O module for Easy Component Change

The front I/O module enables the location of the DVD-ROM and other components to be changed easily according to the required configuration.

---

Two Channel Fan Controller and Temperature Display (Z9-U3 only)

The Z9-U3 case has a built-in two channel fan controller for adjusting the speed of up to two connected fans. The ambient temperature of the case is shown using an LED temperature display. By controlling the noise and interior temperature with the fan speed controller, the system can be operated in the optimum condition. On the front I/O module there are microphone and headphone sockets along with two USB3 and two USB2 ports on the Z9-U3 and four USB2 ports on the Z9, for convenience and expandability.

---

Side Cut-outs to Show off The Components

The side of the Z9 and the Z9-U3 are different on each other. The Z9 has a mesh cutout where it is possible to mount up to two 120mm fans whereas the Z9-U3 has a larger transparent side panel cut-out. This is ideal if you like to show off your PC!

---

Front and Bottom Dust Filters

Dust filters in the front and bottom mesh covers prevent dust from entering the system and help to keep the internal components dust-free.

---

Supports Solid State Drive (SSD)

Space is provided on the back of the motherboard plate for installing a single 2.5” HDD/SSD. There is also a 3-in-1 tray that makes it possible to install an FDD / 3.5” HDD / 2.5” HDD/SSD.

---

Motherboard Mounting Hole for Convenient CPU Cooler Installation

The Motherboard tray features a cut-out to allow quick and easy access to the bottom of the motherboard for convenient CPU cooler installation/removal without having to remove the motherboard from the case.

---

Watercooling Holes for Liquid Cooling Systems

If you are into watercooling your components, at the back of the case you will find two watercooling holes allowing the pipes to be fed into the system.

---