Twin Mounter 2.5 Rev.C, 2.5 to 3.5inch Adapter Discontinued | |
More variations available Show |
Scythe Twin Mounter 2.5 Rev.C, 2.5 to 3.5inch Adapter
Scythe’s Twin Mounter 2.5 allows installation of up to two 2.5” SSD/HDD units in one 3.5” bay which is a great way to save space in a traditional PC case.
Features
- Allows for two 2½” drives to be installed in one 3½” bay
- Ideal for laptop and solid state drives
- Has captive rubber washers for drive shock protection
- Easy to install
With prices falling and storage pace increasing, 2½” hard disk drives former primarily designed for mobile PCs, but now they are becoming the hard drive of choice for quiet PC enthusiasts . Especially now that Solid State Drive (SSD) technology is becoming a must-have for users who want their PCs to be totally silent.
Twin Mounter 2.5 allows installation of up to two 2.5” hard disk drives or SSDs in one 3.5” bay which additionally means saving space in traditional PC cases.
Specifications | Twin Mounter 2.5 |
---|---|
Model Number | 2.5 Twin Mounter |
Weight | 170 g |
Material | Metal |
HDD Compatibility | 2x 2.5” HDD / SSD |
Required Space | 1x 3.5” Bay |
Standard Accessory | Screw for Hard Disk Mounting (8 pcs.); Screw for Case Mounting (4 pcs.) |
Warranty | 24 months |
EAN barcode | 4571225047508 |
Specifications | Twin Mounter 2.5 |
---|---|
Model Number | 2.5 Twin Mounter |
Weight | 170 g |
Material | Metal |
HDD Compatibility | 2x 2.5” HDD / SSD |
Required Space | 1x 3.5” Bay |
Standard Accessory | Screw for Hard Disk Mounting (8 pcs.); Screw for Case Mounting (4 pcs.) |
Warranty | 24 months |
EAN barcode | 4571225047508 |
Customer Reviews
dead easy
as somebody wrote - no sharp edges, no cuts! I put in-between those my SSD and 2.5inch HDD. really simple. the only bad bit - i fitted the disks in it the wrong way round and I ended up with sata connectors at the front of my case instead inside of it. There are no marks how to place it inside, so you may have to try doing it by yourself. on the other hand - it might had been a problem with my rig… There was a misalignment with the screws’ wholes. Just fitted the disks other way round and fits in perfectly!
not a cheap thin metal! properly built! not too heavy! perfect.
Excellent
Excellent product - works brilliantly. It’s well made and replicates the screw hole position and type (i.e. wide thread) of a full size 3.5” HDD. This is not the case with some 2.5” to 3.5” adapters I’ve come across.
One thing to note though is that if the HDD you’re mounting is particularly deep (such as the newer 2.5” WD Raptor) you might have trouble fitting in a second disk into the same mounting. Doesn’t detract from the product however, you’d just need to buy two!
Scythe Twin Mount 2.5 to 3.5
Just like the picture. Well made, neat and clean edges (no cut fingers yet). Comes with all the mounting screws needed. Fitted in my case’s HDD caddy without issues. Very happy.
Product Resources
Top Storage
Samsung 990 PRO 1TB M.2 PCIe 4.0 NVMe SSD
Samsung 990 PRO 2TB M.2 PCIe 4.0 NVMe SSD
Kingston NV3 500GB PCIe 4.0 M.2 NVMe SSD
Kingston NV3 1TB PCIe 4.0 M.2 NVMe SSD
Samsung 990 PRO 4TB M.2 PCIe 4.0 NVMe SSD
Seagate BarraCuda 2.5in 5TB 15mm Hard Disk Drive HDD, ST5000LM000
Samsung 870 QVO 1TB SSD Solid State Drive
Samsung 870 QVO 4TB SSD Solid State Drive
Samsung 870 QVO 8TB SSD Solid State Drive
Kingston NV3 2TB PCIe 4.0 M.2 NVMe SSD