HFX 521 BorgFX VGA, Heatpipe GPU Cooler Discontinued | |
| More variations available Show | |
mCubed HFX 521 BorgFX VGA, Heatpipe GPU Cooler
mCubed’s heatpipe graphics card cooler is designed to work with the vast array of graphics cards available, just as long as at least two mounting holes are present around the GPU.
The two heatpipes transfer the heat away from the GPU and transfer it to the side heatsink on the chassis. The cooler is compatible with both the Mini and the Classic cases. it is even compatible with system that incorporate two graphics cards, although two coolers will need to be purchased!
Features
- For HFX Mini or Classic chassis
- Silences the graphics card
- Nickel coated copper block
- Low profile, only 18mm
- Rear mounting plate prevents the card from bending
- Compatible with Mini and Classic chassis
| Specifications | 521 BorgFX VGA |
|---|---|
| Mounting hole distance | 54mm or 72 to 80mm |
| Copper block | 38 x 30 x 7mm |
| Heatpipe adaptor | 35 x 30 x 5mm |
| Heatpipes | Copper, diameter=5mm, 150 x 70mm, 90° bended |
| Total height | 18mm |
| Specifications | 521 BorgFX VGA |
|---|---|
| Mounting hole distance | 54mm or 72 to 80mm |
| Copper block | 38 x 30 x 7mm |
| Heatpipe adaptor | 35 x 30 x 5mm |
| Heatpipes | Copper, diameter=5mm, 150 x 70mm, 90° bended |
| Total height | 18mm |
