MS800 Plus Computer Case Discontinued | |
More variations available Show |
Zalman MS800 Plus Computer Case
Introducing Zalman’s latest tower case, the MS800 Plus. The modular front bay design differentiates this case from the crowd and the smooth rounded edges of the case add to the overall quality. The internal cooling system is designed for hot air inside the system to be expelled as quickly as possible to maintain optimum temperature for stable system operation.
Features
- Supplied with four fans
- Built-in multi-fan controller
- USB3.0 support
- Graphics card support provided
- Supports hot-swap HDD bays
- Transparent acrylic side panel
Supplied with four fans
The MS800 Plus is supplied with four chassis fans. The 92mm fans are designed to cooler the hard drives and any expansion cards. There are also two 120mm fan install in the top and rear of the case, these are designed to expel any heat generated by the PC. Finally there are also space available to install two additional 120mm fans if more cooling is required.
Graphics card support provided
Running down the centre of the chassis from top to bottom is a support beam. This beam is designed to do two things, firstly it can support the graphics card to prevent it from bending over time. This is ideal if you are a gamer who uses a heavy graphics card (see #1). The second benefit of the beam is that it holds a 92mm fan. This can be moved and rotated so the airflow points to exactly where it is needed (see #2). There is a maximum of three position the beam can be located. The best position is determined by the length of the graphics card used.
Built-in multi-fan controller and USB3
On top of the case there are many convenient features. As well as the usual power and rest buttons there is also two USB2 ports, two USB3 ports and front headphone and microphone ports. There is also the built-in fan controller which can control up to six fans. The dial adjusts the voltage the fans receive so if more cooling is required then increasing or decreasing the fan speed has never been easier.
Supports hot-swap HDD bays
The bottom three 5.25” drives are supplied with caddies that are designed to hold 3.5” hard drives, which connect to a Hot Swap PCB inside the chassis. This makes it extremely easy to add and remove hard drives from the PC as access to them is from the front of the chassis and not the side. Please refer to the instruction manual for correct usage of hot swappable hard drives.
Transparent acrylic side panel
The enhance the look of the chassis the MS800 is equipped with an acrylic side panel, which makes it possible to show off the inside of the PC. Also the 120mm fan which is installed on the top of the chassis has blue LEDs which gives the PC a cool blue glow to it.
Specifications | MS800-PLUS |
---|---|
Enclosure Type | ATX Mid Tower |
Dimensions | 207(W) x 533(H) x 541(D)mm |
Weight | 9kg |
Materials | Plastic, Steel |
Motherboard Compatibility | Standard ATX / Micro ATX |
Power Supply Compatibility | Standard ATX / ATX12V |
VGA Card | Full Size (300mm) |
External 5.25” Drive Bays | 6 |
3.5” Hot-swap bays | 3 |
Internal Bay 5.25”/3.5”/2.5” | 1 |
Font fan | 92mm Fan Bracket x1 (supplied) |
Rear fan | 120mm Fan Vent x1 (supplied) |
Top fans | 120mm Fan Vent x2 (1 LED fan supplied) |
Cooling Kit (internal) | 92mm fan supplied |
Bottom fan | 120mm Fan Vent x1 (not supplied) |
Fan Controller Simultaneously Control | 6 |
Expansion Card Slots | 7 |
I/O Ports | Headphones x 1, Mic x 1, USB 2.0 x 2, USB 3.0 x 2 |
Warranty | 24 months |
EAN barcode | 8809213764448 |
Specifications | MS800-PLUS |
---|---|
Enclosure Type | ATX Mid Tower |
Dimensions | 207(W) x 533(H) x 541(D)mm |
Weight | 9kg |
Materials | Plastic, Steel |
Motherboard Compatibility | Standard ATX / Micro ATX |
Power Supply Compatibility | Standard ATX / ATX12V |
VGA Card | Full Size (300mm) |
External 5.25” Drive Bays | 6 |
3.5” Hot-swap bays | 3 |
Internal Bay 5.25”/3.5”/2.5” | 1 |
Font fan | 92mm Fan Bracket x1 (supplied) |
Rear fan | 120mm Fan Vent x1 (supplied) |
Top fans | 120mm Fan Vent x2 (1 LED fan supplied) |
Cooling Kit (internal) | 92mm fan supplied |
Bottom fan | 120mm Fan Vent x1 (not supplied) |
Fan Controller Simultaneously Control | 6 |
Expansion Card Slots | 7 |
I/O Ports | Headphones x 1, Mic x 1, USB 2.0 x 2, USB 3.0 x 2 |
Warranty | 24 months |
EAN barcode | 8809213764448 |
Customer Reviews
It's a fine case.
It says that it’s a mid tower but I think it’s a Tower case as it can be. HDD (hot-swap) bays caused me trouble but that was a cable problem & solved quickly. It’s a heavy, good looking & a quality case for this price. Recommended.
Product Resources
Top Quiet PC Cases
Fractal Design Define 7 Mid Tower Black PC Case
Fractal Design Meshify 2 Compact Black PC Case
Streacom DA2 V2 Black Full Aluminium Compact ITX Chassis
Streacom ST-BC1 V2 Silver Aluminium ATX Open Benchtable
MyElectronics 19in 2U Rackmount Short Depth Mini-ITX Chassis
ASUS PRIME AP201 Black Micro-ATX PC Chassis
Streacom ST-BC1 Mini Black Aluminium ITX Open Benchtable
Cooler Master Masterbox Q300L V2 Micro-ATX PC Chassis
Streacom ST-BC1 V2 Black Aluminium ATX Open Benchtable
Fractal Design Pop Silent Mini Micro-ATX PC Case with Sound Dampening Foam