PC Anti-Vibration Kit Discontinued
More variations available Show

Fansis PC Anti-Vibration Kit Ultra

Replaced by the Fractal Design Anti-Vibration Kit

This useful kit should be part of every PC enthusiast’s toolbox! It contains all the screws and hardware you need for mounting fans, drives and cards in your PC. It also contains four high-quality teflon feet to decrease vibrational noise when your PC is on the desk or a hard floor, and make the PC easier to move. The box is reusable and comes with spare compartment dividers so you can use it to safely store up to ten different types of small items.

Features

Convenient reusable box contains six compartments of PC mountings
4 x teflon sliding case feet reduce vibration and improve PC manoeuvrability
8 x silicone fan mounts eliminate fan vibration for up to two fans
4 x metal thumb screws allow convenient access for PSU, case sides, PCI cards etc.
24 x screws and washers eliminate HDD/DVD vibration (3 HDD + 3 DVD drives)

Specifications	Anti-Vibration Kit
Dimensions (W x H x D)	132 x 23 x 72 mm (ex. hanging hook)
Weight	106 g
Teflon sliding case feet	qty 4
Blue silicone fan mounts	qty 8
CD-ROM/DVD-ROM screws	qty 12
Hard disk drive screws	qty 12
Quick-release metal thumb screws	qty 4
Silicone washers	qty 12
Rubber washers	qty 12
Warranty	24 months

Specifications	Anti-Vibration Kit
Dimensions (W x H x D)	132 x 23 x 72 mm (ex. hanging hook)
Weight	106 g
Teflon sliding case feet	qty 4
Blue silicone fan mounts	qty 8
CD-ROM/DVD-ROM screws	qty 12
Hard disk drive screws	qty 12
Quick-release metal thumb screws	qty 4
Silicone washers	qty 12
Rubber washers	qty 12
Warranty	24 months

Customer Reviews

Great kit!

Poul Petersen, 22nd February 2010

Have bought a few of these and they are very handy. A bit over-priced, but still very useful if you want to gain a little extra silence and reduce feed-back noise (rumbling). Recommended.

Helped slightly.....main vibration coming from the hdds

Richard Bignell, 24th January 2010

Not sure if this made a noticeable difference. Thumb screws are handy though for getting into the case quickly.

Quiet PC replied on 26th January 2010

If you don’t need the silicone fan mounts, thumb screws or HDD screws and washers then our AcoustiFeet will provide better anti-vibration characteristics if your PC is stood on a hard surface. The feet included in this Fansis kit are non-stick which allows the PC to be easily moved by sliding it, rather than being specifically designed to eliminate vibration noise. To drastically reduce hard drive noise, we would recommend you consider one of our HDD silencing products.